Home > Cisco, Networking > How to Configure Static Route?

How to Configure Static Route?

To configure Static Routes, first enter global configuration mode to run the following commands.

Configure the Static Routes on R1
R1>enable
R1#configure terminal
R1(config)#ip route 192.168.2.0 255.255.255.0 192.168.1.2
R1(config)#ip route 192.168.3.0 255.255.255.0 192.168.1.2
R1(config)#exit
R1#


Run the command show ip route on R1

Configure the Static Routes on R2

R2>enable
R2#configure terminal
R2(config)#ip route 192.168.3.0 255.255.255.0 192.168.2.2
R2(config)#exit
R2#

Run the command show ip route on R2

Configure the Static Routes on R3
R3>enable
R3#configure terminal
R3(config)#ip route 192.168.1.0 255.255.255.0 192.168.2.1
R3(config)#exit
R3#

Run the command show ip route on R3

Configure the Static Routes on R4
R4>enable
R4#configure terminal
R4(config)#ip route 192.168.1.0 255.255.255.0 192.168.3.1
R4(config)#ip route 192.168.2.0 255.255.255.0 192.168.3.1
R4(config)#
R4#

Run the command show ip route on R4

Download: Static Route

Categories: Cisco, Networking
  1. No comments yet.
  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: